DIN, ASTM, BS Stainless Steel 321 / 321h Nuts, Stainless Steel Hex Stainless Steel 321 / 321h Nuts, Duplex & Super Duplex Steel Heavy Hex Bolt, Alloy Steel Hex Cap Screw, Stainless Steel 321 / 321h Nuts Manufacturer & Stockist
Chhajed Steel and Alloys is one of the known makers and suppliers of Stainless Steel 321 Nuts and Stainless Steel 321H Nuts, which is accessible from us in different subtleties to investigate. Buy SS 321 Nuts and SS 321H Nuts at pragmatic expense from us Combination 321 Nuts (Din 1.4541 Nuts) Stainless Steel UNS S32100 Nuts is a fair out austenitic treated steel like SS 304 yet with a titanium extension of no under multiple times the carbon content. Hardened Steel 321 Hex Nuts ideas as its key inclination an extraordinary assurance from intergranular disintegration following introduction to temperatures in the chromium carbide precipitation stretch out from 800 to 1500 Degree F (427 to 816 Degree C). Hardened Steel 321 Heavy Hex Nuts is offset against weld warm affected zone intergranular utilization, and contradicts polythionic destructive nervousness disintegration opening. Tempered Steel 321 Lock Nuts is much of the time used as a piece of Aircraft ventilation frameworks, Expansion joints, Bellows, Furnace parts and that is only the start.
Amalgam 321H Nuts (Din 1.4878 Nuts) Stainless Steel UNS S32109 Nuts is a for the most part used composite, where parts are warmed inside carbide-precipitation temperature expand (800 Degree F – 1500 Degree F) and displayed to ruinous air. Tempered Steel 321 Nylon Insert Nutsis titanium offset austenitic treated steel that is known for its general utilization insurance. In Stainless Steel 321H Self-Locking Nuts, the carbon joins extraordinarily with titanium to shape harmless titanium carbide, leaving the chromium in answer for keep up full utilization insurance. Treated Steel 321H Coupler Nuts is routinely used as a piece of Jet engine parts, Aircraft weaken stacks and manifolds.
Material |
Specification |
Standards | Size |
Length |
Stainless Steel 321 / 321H Nuts
|
IS BS ASTM |
ASTM / ASME - A/ SA 193 | 3 mm |
M02 to M33 |
Grade |
Mn |
N |
P |
C |
S |
Cr |
Mo |
Si |
Ni |
Other |
|
321 |
min. max |
2.00 |
0.10 |
0.045 |
- 0.08 |
0.030 |
17.0 19.0 |
- |
0.75 |
9.0 12.0 |
Ti=5(C+N) 0.70 |
321H |
min. max |
2.00 |
- |
0.045 |
0.04 0.10 |
0.030 |
17.0 19.0 |
- |
0.75 |
9.0 12.0 |
Ti=4(C+N) 0.70 |
Grade |
Tensile Strength (MPa) min |
Yield Strength 0.2% Proof (MPa) min |
Elongation (% in 50mm) min |
Hardness |
|
Rockwell B (HR B) max |
Brinell (HB) max |
||||
321 |
515 |
205 |
40 |
95 |
217 |
321H |
515 |
205 |
40 |
95 |
217 |
Grade |
UNS No |
Old British |
Euronorm |
Swedish SS |
Japanese JIS |
||
BS |
En |
No |
Name |
||||
321 |
S32100 |
321S31 |
58B, 58C |
1.4541 |
X6CrNiTi18-10 |
2337 |
SUS 321 |
321H |
S32109 |
321S51 |
- |
1.4878 |
X10CrNiTi18-10 |
- |
SUS 321H |
 Stainless Steel 321 Hex Nuts |
 Stainless Steel 321H Heavy Hex Nuts |
 Stainless Steel 321 Lock Nuts |
 Stainless Steel 321H Self Locking Nuts |
 Stainless Steel 321 Nylon Insert Nuts |
 Stainless Steel 321H Coupler Nuts |
| Stainless Steel 321 Nuts | SS 321 DIN 935 Nuts |
| Stainless Steel 321 Flex Lock Nut | SS 321H High Nuts Supplier |
| Stainless Steel 321 K Lock Nut Dealer | 321H SS Serrated Flange Nuts |
| Stainless Steel 321 Self Locking Nuts Supplier | SS 321H Nut Distributor |
| Stainless Steel 321 Square Nuts Wholesaler | SS 321H Coupler Nut |
| Stainless Steel 321 Coupling Nuts | SS 321H Self Locking Nuts Manufacturer |
| Stainless Steel 321 Castle Nuts | ISO Certified SS 321/321H Nuts |
| ASTM / ASME - A/ SA 193 Slotted Nut | SS DIN 1.4541 / 1.4878 Way Lock Nuts Manufacturer |
| Stainless Steel 321 Wing Nut | SS UNS S32100 / S32109 Jam Nuts |
| 321 Stainless Steel Coupler Nuts Exporter | 321H SS spring T Nut Stockist |
| Stainless Steel 321 Hex Nut Washer | SS 3321H Heavy Hex Nuts |
| Stainless Steel 321/321H Cap Nut | SS 321/321H Nylon Insert Nut Exporter |